Resetting.....

Upcoming fresh hacks

Non-Technical Hacks that works - Have Fun! (Status: in progress..)

Hacking network based biometric time-attendance system - Be your own boss! (Status: Done!)
Milestone Xprotect License Bypass hack - Replace a camera without license re-activation (Status: Done!)

Sunday, May 29, 2011

First JTAG attempt: Motorola CPEi35775 (from Menatelecom)

Motorola CPEi35775


openocd .... Halt error!

C:\openocd\bin>openocd -f openocd.cfg
Open On-Chip Debugger 0.5.0-dev (2010-10-28-22:42)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.berlios.de/doc/doxygen/bugs.html
Warn : Adapter driver 'parport' did not declare which transports it allows; assu
ming legacy JTAG-only
Info : only one transport option; autoselect 'jtag'
parport port = 0x378
srst_only separate srst_gates_jtag srst_push_pull
0
Info : clock speed 500 kHz
Info : JTAG tap: tnetv1061.cpu tap/device found: 0x1b6c602f (mfg: 0x017, part: 0
xb6c6, ver: 0x1)
Info : accepting 'telnet' connection from 4444
Info : JTAG tap: tnetv1061.cpu tap/device found: 0x1b6c602f (mfg: 0x017, part: 0
xb6c6, ver: 0x1)
Info : JTAG tap: tnetv1061.cpu tap/device found: 0x1b6c602f (mfg: 0x017, part: 0
xb6c6, ver: 0x1)
Info : Halt timed out, wake up GDB.
Error: timed out while waiting for target halted
TARGET: tnetv1061.cpu - Not halted
Command handler execution failed
in procedure 'reset'

------------

Open On-Chip Debugger
> reset
JTAG tap: tnetv1061.cpu tap/device found: 0x1b6c602f (mfg: 0x017, part: 0xb6c6,
ver: 0x1)
> reset init
JTAG tap: tnetv1061.cpu tap/device found: 0x1b6c602f (mfg: 0x017, part: 0xb6c6,
ver: 0x1)
Halt timed out, wake up GDB.
timed out while waiting for target halted
TARGET: tnetv1061.cpu - Not halted
Command handler execution failed
in procedure 'reset'



End!

1 comments:

freakazoid said...

dude what do you think of poting openwrt on this router!!!!!!!

Post a Comment